Manufacturer |
Sepha |
Model |
MediScan T603-001-002 |
Serial No. |
603-018 |
Test Area |
250mm (L) X 200mm (W) X 100mm (D) | 9.9”L x 7.8”W x 3.9”D (APPROX) |
Test Cycle |
From 20 seconds per test cycle |
Tooling Change Over |
No Tooling Required |
Operation Type |
Semi-Automatic |
Configuration |
2x USB | 1x Ethernet Port |
Controls / HMI |
10” LCD Touch Display |
Air Specs |
Minimum 200L/min @ 0.6Mpa | 7cfm/min @ 88psi |
Machine Construction |
304 Stainless Steel Case |
Electrical Specs |
110/230V / Single Phase / 50/60Hz |
Overall Machine Dims |
400mm (L) X 700mm (W) X 500mm (D) | 16”L x 28”W x 20”D |
Manufacture Date |
Jan. 2017 |
Weight |
90kg / 200lbs (approx) |
Highlights |
Non-Destructive Seal Integrity & Leak Testing | No tooling required, making it highly flexible | Tabletop Device | Easy Operator use via touchscreen interface | Fully Validated System | Fast & efficient test speed |
Seller Note: |
Unit is USED. This UNIT IS VERY GOOD CONDITION. This unit has been powered up and boots properly into the HMI portion. We have not been able to test the unit. Unit shows very little signs of visible surface wear, scratching, some paint can be seen peeling on the outside of the base, otherwise not affecting intended use of the unit. What you see in the picture is what is included in sale. Unit is being sold AS-IS, WHERE-IS, AS SHOWN. Pictures are of the actual unit being purchased. If the buyer has any questions, please feel free to ask. Buyer is always welcome to inspect the unit before purchasing at our location. |
Sepha MediScan
Non-Destructive Package Leak Tester
|
Manufacturer:
|
Sepha
|
Model:
|
MediScan T603-001-002
|
Serial No.:
|
603-018
|
Test Area:
|
250mm (L) X 200mm (W) X 100mm (D) | 9.9”L x 7.8”W x 3.9”D (APPROX)
|
Test Cycle:
|
From 20 seconds per test cycle
|
Tooling Change Over:
|
No Tooling Required
|
Operation:
|
Semi-Automatic
|
Configuration:
|
2x USB | 1x Ethernet Port
|
Controls / HMI:
|
10” LCD Touch Display
|
Air Specification:
|
Minimum 200L/min @ 0.6Mpa | 7cfm/min @ 88psi
|
Construction:
|
304 Stainless Steel Case
|
Electrical Specs:
|
110/230V / Single Phase / 50/60Hz
|
Overall Machine Dims:
|
400mm (L) X 700mm (W) X 500mm (D) | 16”L x 28”W x 20”D
|
Manufactured Date:
|
1/17
|
Weight:
|
90kg / 200lbs (approx)
|
|
|
Highlights:
|
- Non-Destructive Seal Integrity & Leak Testing
- No tooling required, making it highly flexible
- Tabletop Device
- Easy Operator use via touchscreen interface
- Fully Validated System
- Fast & efficient test speed
|
|
|
Seller Note:
|
Unit is USED. This UNIT IS VERY GOOD CONDITION. This unit has been powered up and boots properly into the HMI portion. We have not been able to test the unit. Unit shows very little signs of visible surface wear, scratching, some paint can be seen peeling on the outside of the base, otherwise not affecting intended use of the unit. What you see in the picture is what is included in sale. Unit is being sold AS-IS, WHERE-IS, AS SHOWN. Pictures are of the actual unit being purchased. If the buyer has any questions, please feel free to ask. Buyer is always welcome to inspect the unit before purchasing at our location.
|
|
|
|
|
|
No files or videos to display